how to build a shed with slanted roof
A slanted shed roof can easily be built if one of the walls of the shed stands taller than the opposite one. if both walls are the same height, you can either raise one by adding plates to it, or you can build a frame for the wall separately and then install this on top of the wall.. In order to build a slanted roof, one of your shed's walls must be higher than the other. if the shed walls are level with each other, you will need to build up one wall either by adding top plates or by constructing a small frame wall and adding it to your existing wall prior to constructing the slanted roof.. A sloped roof storage shed can either have the sides open or closed. a lean-to is a shed with a sloped roof and no side walls. sheds that do not have sides are good for storing and drying wood, storing lawn care equipment like snow blowers and lawn mowers and storing children's bikes and other outdoor toys..
how to build a shed with slanted roof
If you want to make a slanted shed roof, then you will need to frame the roof properly, so that it is completely supported.one method of achieving the slant in your roof is to have one of the walls higher than the other. however, you can also frame the roof so that one side of the frame is bigger than the other sides, giving the slant.. Level the ground (if necessary) and install deck piers along a grid to support the shed. the piers will allow you to string support beams beneath the floor of the shed. in the example design, the piers are spaced 6 feet (1.8 m) apart in one direction and 4 feet (1.2 m) apart in the other for a total grid area of 12 x 8 feet..
---> click here <---
0 komentar:
Posting Komentar